Appendix A - Specifications - EnGenius ECB-8610 User Manual

11a/b/g Wireless Multi-Client Bridge/AP/WDS
Appendix A – Specifications
Data Rates
1, 2, 5.5, 6, 9, 11, 12, 18,
24, 36, 48, 54 Mbps
Standards
IEEE802.11a/b/g,
IEEE802.3, IEEE802.3u,
IEEE802.3af, IEEE802.1f,
IEEE802.1x
Compatibility
IEEE 802.11a/ IEEE
802.11g/ IEEE 802.11b
Power Requirements
Power Supply: 90 to 240
VDC ± 10％ (depends on
different countries)
Device: 12 V/ 1A
Ethernet POE in:
36~57VDC for 802.3af
Status LEDs
LAN: Link, WLAN: Link,
Power: on/off
Regulation Certifications
FCC Part 15/UL, ETSI
300/328/CE
RF Information
Frequency Band
802.11a: 5.15~5.25GHz,
5.25~5.35GHz,
5.47~5.725GHz,
5.725~5.825GHz
802.11b/g: U.S., Europe
and Japan product
covering 2.4 to 2.484 GHz,
programmable for different
country regulations
Media Access Protocol
Carrier Sense Multiple
Access with Collision
Avoidance (CSMA/CA)
Modulation Technology
DBPSK @ 1Mbps
DQPSK @2Mbps
CCK @ 5.5 & 11Mbps
BPSK @ 6 and 9 Mbps
QPSK @ 12 and 18 Mbps
16-QAM @ 24 and 36
Mbps
64-QAM @ 48 and 54
Mbps
Operating Channels
11 for North America, 14
for Japan, 13 for Europe,
Receive Sensitivity (Typical)
• 5.15~5.85G(IEEE802.11a)
6Mbps@ -88dBm;
54Mbps@ -70dBm
• 2.412~2.472G(IEEE802.1
1g)
6Mbps@ -91dBm;
54Mbps@ -74dBm
• 2.412~2.472G(IEEE802.1
1b)
11Mbps@ -90dBm
1Mbps@ -95dBm
Available Transmit Power
(Typical)
• 5.15~5.24 GHz
(IEEE802.11a)
17dBm @6 ~ 36Mbps
16 dBm @48Mbps
15 dBm @54Mbps
• 5.26~5.35GHz
(IEEE802.11a)
20dBm @6 ~ 24Mbps
18dBm @36Mbps
16 dBm @48Mbps
15 dBm @54Mbps
•
5.745~5.85GHz
(IEEE802.11a)
18dBm @6 ~ 24Mbps
16dBm @36Mbps
14 dBm @48Mbps
13 dBm @54Mbps
• 2.412~2.472G
(IEEE802.11g)
26dBm @6 ~ 24Mbps
23dBm @36Mbps
22 dBm @48Mbps
21 dBm @54Mbps
• 2.412~2.472G
(IEEE802.11b)
Up to 26 dBm. @1, 2, 5.5
and 11Mbps
Version 1.0
RF Connector
TNC Type (Female
Reverse)
Networking
Topology
Ad-Hoc, Infrastructure
Operation Mode
Point-to-Point/ Point-to-
Multipoint Bridge/ AP/
Client Bridge/ WDS
Interface
One 10/100Mbps RJ-45
LAN Port
Security
IEEE802.1x Authenticator /
RADIUS Client (EAP-
MD5/TLS/TTLS) Support
in AP Mode
WPA/WPA2 supplicant
support in Client Bridge
mode
WPA2/WPA / Pre-share
Key (PSK)/ AES/TKIP
MAC address filtering (AP
mode)
Hide SSID in beacons
IP Auto-configuration
DHCP client/server
Management
Configuration
Web-based configuration
(HTTP)
Telnet Configuration
SNMP V1
Firmware Upgrade
Upgrade firmware via
web-browser
Environmental
Temperature Range
Operating: -10°C to 50°C
(14°F to 132°F)
Storage: -40°Cto 70°C (-
40°F to 158°F)
Humidity (non-condensing)
5%~95% Typical
53