Table of Contents
Advertisement
Setting the Presentation Timer
The presentation timer can indicate the presentation time on-screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1.
Enter Basic > Presentation Timer menu.
2.
Press [Enter] to show the Presentation Timer page.
3.
Select Timer Period and press / to confirm the duration. Duration can be set to
1 to 5 minutes, with 1 minute increments, or 5 to 240 minutes. The options are 5, 10,
15, 20, 60, 120, 240 minutes.
Once the timer has been activated, resetting the timer interval will re-activate the timer.
4.
Press and select the Timer Display. Then press / to select whether to display
or hide the on-screen timer.
Selection
Always
1 min/2 min/3 min
Never
Press and select Timer Position, and then press / to set timer location.
5.
Top-Left Bottom-Left Top-Right Bottom-Right
6.
Press to select Timer Counting Direction, then press / to select the required
timer method.
Selection
Count Up
Count Down
7.
To activate Presentation Timer, press and select Start Counting, then press /
to select Yes. The timer will start counting after exiting the OSD menu.
To cancel the timer, perform the following steps:
1.
Enter Basic > Presentation Timer menu.
2.
Press and select Start Counting.
3.
Select No. The timer will stop counting after exiting the OSD menu.
To activate the sound reminder, perform the following steps:
1.
Enter Basic > Presentation Timer menu.
2.
Press and select Sound Reminder.
3.
Press / to select On and exit the OSD menu. When the time comes up to the set
time of timer, it will make a sound.
Description
Displays the timer on screen throughout the presentation time.
Display timer on-screen in the last 1 / 2 / 3 minutes.
Hides the timer throughout the presentation time.
Description
Increases from 0 to the preset time.
Decrease from the preset time to 0.
33
Advertisement
Table of Contents
