Connecting To Hdmi Devices; To Connect The Projector To A Component Video Source Device; Connecting To Composite Video Source Devices - ViewSonic LS700HD User Manual

Connecting to HDMI devices

Use an HDMI cable to establish a connection between the projector and HDMI device.
1. Connect one end of the HDMI cable to the HDMI output jack on the video device.
2. Connect the other end of the cable to the HDMI signal input jack on the projector.
In the unlikely event that the projector is connected to a DVD player via the projector's HDMI
input and the projected picture displays wrong colors, please change the color space to YUV.
See "Changing HDMI input settings"
To connect the projector to a Component Video source
device:
Examine your Video source device to determine if a set of unused Component Video
output sockets are available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method to use to connect to the device.
1. Take a VGA (D-Sub) Component adapter cable and connect the end with 3 RCA
type connectors to the Component Video output sockets of the Video source device.
Match the color of the plugs to the color of the sockets; green to green, blue to blue,
and red to red.
2. Connect the end of the VGA (D-Sub) Component adapter cable (with the D-Sub type
connector) to the COMPUTER 1 or COMPUTER 2 jack on the projector.
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and operating
correctly. You must also check that the signal cables have been connected correctly.

Connecting to composite video source devices

Examine your Video source device to determine if an unused composite output jack is
available:
• If so, you can continue with this procedure.
• If not, you will need to reassess which method to use to connect to the device.
1. Take a Video cable and connect one end to the composite Video output socket of the
Video source device.
2. Connect the other end of the video cable to the VIDEO socket on the projector.
If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the Video source device is turned on and operating
correctly. You must also check that the signal cables have been connected correctly.
When the component video is not available, use the composite video connection method to
connect to this device. See
for details.
"Connecting to Video source devices"
17
for details.