Table of Contents
Advertisement
Replacing the remote control battery
1.
To open the battery cover, place the remote control with the backside facing upwards.
Press down at the indicated area and then pull the battery lid upwards along the
indicated direction.
2.
Take out the old batteries (if required) and then place 2 AAA batteries according to
the indicated orientation. The positive pole of the battery should be directed at the (+)
direction while the negative pole should be directed at the direction.
3.
Align the battery cover with the bottom of the remote control and return the cover to
its original position to complete the process.
Open the battery cover as
shown in the illustration.
Warning
● Avoid keeping the remote control and battery in moist or hot places, such as the kitchen, bathroom, sauna,
solarium or car.
● Replace only with the same or equivalent type recommended by the battery manufacturer.
● Refer to the manufacturer's instructions and local environmental regulations to dispose of old batteries.
● Do not throw batteries into fires. There may be danger of an explosion.
● If the battery is flat or if you will not be using the remote control for a while, remove the battery to prevent
battery leaks from damaging the remote control.
Install the battery as shown
in the illustration.
11
Cover the battery cover.
Advertisement
Table of Contents
