Setting The Presentation Timer - ViewSonic LS900WU User Manual

Table of Contents

Advertisement

Setting the presentation timer

Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1.
Go to the BASIC > Presentation Timer menu.
2.
Press Enter to display the Presentation Timer page.
3.
Highlight Timer Period and decide the time period by pressing
time can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-
minute increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
4.
Press
to highlight Timer Display and choose if you want the timer to show up on
the screen by pressing
Selection
Always
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
5.
Press
to highlight Timer Position and set the timer position by pressing
Top-Left
6.
Press
to highlight Timer Counting Direction and select your desired counting
direction by pressing
Selection
Count Up
Count Down
7.
Press
to highlight Sound Reminder and decide if you want to activate sound
reminder by pressing
the last 30 seconds of counting down/up, and a triple beep sound will be produced
when the timer is up.
8.
To activate the presentation timer, press
Counting and press Enter.
9.
A confirmation message displays. Highlight Yes and press Enter to confirm. You will
see the message "Timer is On" displaying on the screen. The timer starts counting
when the timer is on.
To cancel the timer, perform the following steps:
1.
Go to the BASIC > Presentation Timer menu.
2.
Highlight Off. Press Enter. A confirmation message displays.
3.
Highlight Yes and press Enter to confirm. You will see the message "Timer is Off"
displaying on the screen.
/
.
Description
Displays the timer on screen throughout the presentation
time.
Hides the timer throughout the presentation time.
Bottom-Left
Top-Right
/
.
Description
Increases from 0 to the preset time.
Decreases from the preset time to 0.
/
. If you select On, a double beep sound will be heard at
39
/
Bottom-Right
and press
/
to highlight Start
. The length of
/
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vs17642

Table of Contents