Table of Contents
Advertisement
3.5 How to Install the Memory Modules
(DDR4 Low Voltage (1.2V))
1. The 4X4 BOX-V1000/R1000 requires DDR4 SO-DIMM (1.2V).
2. For dual channel configuration, you always need to install identical (the same brand,
speed, size and chip-type) DDR4 SO-DIMM pairs.
The SO-DIMM only fits in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.
12
Advertisement
Table of Contents
