How To Install The Memory Modules (Ddr3 Low Voltage (1.35V)) - ASROCK Beebox Series Manual

3.5 How to Install the Memory Modules
(DDR3 Low Voltage (1.35V))
1. he Beebox series requires DDR3L SO-DIMM (1.35V).
2. For dual channel coniguration, you always need to install identical (the same brand,
speed, size and chip-type) DDR3L SO-DIMM pairs.
he SO-DIMM only its in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.
12