Summary of Contents for CAVIDYNE CaviBlaster 1325-GSS
Page 1
CAVIDYNE LLC 5077 Fruitville Road Suite 109 - 157 Sarasota, FL 34232 USA Phone: (352) 275-5319 www.caviblaster.com Operation & Maintenance Manual Model 1325-GSS...
Page 2
This connection is made with a quick connect fitting (Figure # 10). 7. Connect the High Pressure Hose (Figure # 11) Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 3
Figure # 4 – Gas Level in Fuel Tank Figure # 5 – Engine Oil Fill Port Figure # 6 – Pump Oil Fill Port Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 4
Figure # 9 – By-Pass Hose Connection Figure # 10 – Fuel Line Connection Figure # 11 – Figure # 12 – Feed Pump On Switch High Pressure Hose Connection Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 5
Figure # 14 – Gear Reducction Oil Figure # 15 – Zero Thrust Gun Figure # 16 – Full Throttle Figure # 17 – High Pressure Hose Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 6
70-psi. Connect the water source to the inlet of the pressure pump (Figure 10). Ensure that the feed hose is connected to the pressure pump and the water is on prior to starting the pressure pump. Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 7
11. When the diver is in position to work move the Throttle to MAX for full power. (Figure # 16) 12. Now the Diver can Work. Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 8
“ON” position while under water. Revert to step 1 of the operating instructions when the diver or replacement is ready to continue cleaning. Figure 18 – Gun Position for Best Results Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 9
If the diver is not wearing a helmet, hearing protection is recommended. CaviDyne recommends “Doc’s Proplugs” vented earplugs or equivalent for diver hearing protection. 2. Activate the cleaning cavitation stream by squeezing the trigger to the open or “ON” position (Figure # 15).
Page 10
(less than ¼ gallon per minute) coming out of the bypass with the gun trigger in the open or “ON” position. Figure # 19 – Adjusting with Pressure Gauge Figure # 20 – Pressure Gauge Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 11
Use single-weight lubricating oil (SAE 30 weight non-detergent) 8. Change the spring for the gun trigger every 12 months or less if required. Summarizing the operating instructions: Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 12
“ON” position while under water. 11. Remove the gun from the water. 12. Flush the system and rinse the outside of the power unit with fresh water. WARNING Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 13
CaviDyne, LLC at (352) 275-5319 with any questions. CAUTION: DO NOT USE IT TO CLEAN SENSITIVE SURFACES LED-Lights, Underwater Lights, Electronic Equipment, Etc. Components Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
By-Pass Hose High Pressure Hose Water Inlet Pump-Hose Zero Thrust Gun High Pressure Lance Gasoline Tank Complete System Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Page 15
Page - CaviBlaster 1325-GSS Operations Manual For More information please email sales@cavidyne.com or call 1-(352)275-5319...
Need help?
Do you have a question about the CaviBlaster 1325-GSS and is the answer not in the manual?
Questions and answers