Macurco RD-6 User Instructions page 71

Macurco RD-xx User Manual
1. One sensor per 900 square feet (approximately)
2. Mount the RD-6 about one foot above the floor.
3. See application building code for fan size and air changes per period of time.
4. Make sure that there are air inlets to provide adequate airflow throughout the building.
5. The RD-xx fan relays are dry contact and can switch up to 240V (see section
6. Several fan relays (starters) may be used. Match the relays to the fan specifications.
REV – 2.1
Figure 3-4 6-Series Multiple Device Diagram
[34-2900-0511-7 ]
2.4 Specifications)
9 |
P a g e