Raider RD-PS01 User Manual page 16

16 www.raider.bg
factors that may affect operation of the pole saw. Repair the pole saw before use if it is found damaged. Many
accidents are caused by improper maintenance of machine.
Saw chain should be clean and sharp. Proper maintenance of sharp cutting edges of saw chain reduces
the risk of jamming and makes operation easier.
1.6. Power tool use and care.
1.7. Safety operation.
1.7.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the pole
saw when you are tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work with pole saw may have the effect of extremely serious injuries.
1.7.2. Avoid the danger of incorporating the pole saw inadvertently.
If you carry a pole saw, keep your finger on the trigger switch, or if you submit a voltage of grinding when
turned on, there is the risk of accident.
1.7.3. Before you switch on the pole saw, that you are sure to remove all utilities and wrenches.
Utilities, forgotten on rotating unit can cause injuries.
1.7.4. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep the
balance. So you can control the pole saw better and safer if unexpected situations arise.
1.7.5. Well as a long time when you will not use the pole saw, unplug the plug from the electric installation.
This measure eliminates the danger of triggering the grinding inadvertently.
1.7.6. Keep a pole saw in places where they can not be reached by children. Do not allow them to be used
by persons who are not familiar with how to work with them and have not read those instructions. When you
are in the hands of inexperienced users, pole saw can be extremely dangerous.
1.7.7. Keep your pole saw with care. Check whether the mobile units operate impeccable, whether it
spells, if there is a broken or damaged item which distort or alter the functions of the pole saw. Before using the
pole saw, make sure that the damaged parts to be repaired. Many accidents are caused by poorly maintained
power tools and appliances.
1.7.8. Keep the power cords a safe distance from rotating work tools. If you lose control of the pole saw,
the cable can be cut or fascinated by the working tool and it can cause injuries.
1.7.9. Never leave pole saw before working tool to completely stop its rotation. Rotary tool can touch the
object, resulting in losing control of the pole saw.
1.7.10. Regularly clean the vent on your pole saw.
1.7.11. Do not use a pole saw near flammable materials. Flying sparks can cause the ignition of such
materials.
1.7.12. Never put your hands near the rotary working tools. If the kick occurs, the instrument can make
you hurt.
1.7.13. Do not use the pole saw when the power cord is damaged. If during operation the cable is
damaged, do not touch. Immediately disconnect the plug from the electric installation.
Damaged power cables increase the risk of electric shock.
Failure of the considered instructions may lead to electric shock, fire and / or severe injuries.
1.7.14. Be very careful at the end of a cut, because the pole saw having no support in processed material
falls down due to its inertia, which may cause injuries.
1.7.15. When working for a long time, the saw operator may experience formication and numbness in
fingers and hands.
Stop working in such case, because numbness reduces precision in saw use.
1.7.16. In the appearance of signs of fatigue should immediately stop work.
1.7.17. Only one person can operate with the pole saw at a time. All other persons shall be away from
working area of the pole saw. Especially children and animals should be away from working area.
1.7.18. When starting the saw, its chain must not rest on the processed material or touch anything else.
1.7.19. When working with the pole saw hold it with both hands by both handles. Keep firm body position.
1.7.20. Children and juveniles cannot operate the pole saw. Allow access to the saw only to adults who
know how to handle the tool. This instruction manual should be given with the pole saw.
1.7.21. Move pole saw away from the material being cut only when the cutting chain is working.
1.7.22. When cutting processed sawn wood or thin branches use support (sawing horse). Do not cut
several boards at the same time (placed one on top of another), or material held by other person or held with
foot.