Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
Description
Item No.
ITEM NO : T-17XB AND T-4848XBT OR T-5454XBT
( PACKED IN SEPARATE BOX)
REVISED DEC 10, 2014
: 10 IN TRANSITIONAL PEDESTAL FOR BUTTERFLY TABLE
: T-17XB AND T-4848XBT OR T-5454XBT
(PACKED IN SEPARATE BOX)
- 1 -
Printed in Vietnam
Advertisement
Related Manuals for Unfinished Furniture of Wilmington T-17XB
Summary of Contents for Unfinished Furniture of Wilmington T-17XB
- Page 1 : 10 IN TRANSITIONAL PEDESTAL FOR BUTTERFLY TABLE Item No. : T-17XB AND T-4848XBT OR T-5454XBT (PACKED IN SEPARATE BOX) ITEM NO : T-17XB AND T-4848XBT OR T-5454XBT Printed in Vietnam ( PACKED IN SEPARATE BOX) REVISED DEC 10, 2014...
-
Page 2: Before Assembly
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please make sure you have the following parts: Description Sketch Description Sketch Pedestal column ITEM NO : T-17XB AND T-4848XBT OR T-5454XBT Printed in Vietnam ( PACKED IN SEPARATE BOX) REVISED DEC 10, 2014 - 2 -... -
Page 3: Hardware List
Allen key Flat washer (4x80mm) (8.5x22mm) NOTE : HARDWARE IS PACKED IN CARTON T-17XB STEP 1 Attach legs (C) to the pedestal (B) with washers (2) and (3) and nuts (1) as shown below. Tighten with the wrench (4). ITEM NO : T-17XB AND T-4848XBT OR T-5454XBT... - Page 4 Place the plate on top of the pedestal (B), attach with washers (6) and (2) and nuts (3) as shown below. Tighten with the Wrench (4). ITEM NO : T-17XB AND T-4848XBT OR T-5454XBT Printed in Vietnam ( PACKED IN SEPARATE BOX)
- Page 5 Carefully put the pedestal block on the bottom side of the table top, attach the top to plate with bolts and washers (from step 2) and tighten with the Allen key (5). ITEM NO : T-17XB AND T-4848XBT OR T-5454XBT Printed in Vietnam...
- Page 6 Place the leaves in the center of the open table top. Push the table top closed. Lock the mechanism underneath2 sides of the table top as shown below. ITEM NO : T-17XB AND T-4848XBT OR T-5454XBT Printed in Vietnam ( PACKED IN SEPARATE BOX)