Reverse Door - Tecla RU0800H User Manual

REVERSE DOOR

Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the
door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1
unscrew
2
3
4
Remove two screws at
rear side of top cover.
Remove top cover and
place it aside.
Unscrew top hinge and
then remove door and
place it on a soft pad to
avoid scratching.
Unscrew bottom
hinge. Then
remove the
adjustable feet
from both
sides.
Put the top cover and fix it with 2
screws on the back.
Unscrew
Unscrew and remove the bottom hinge pin, turn the bracket over
and replace it.
6
7
8
Screw
5
5
Screw
Refit the bracket fitting
the bottom hinge pin.
Replace both adjustable
feet.
Place the door back on.
Ensure the door is aligned
horizontally and vertically,
so that the seals are closed
on all sides before finally
tightening the top hinge.
9
Fix the thermostat knob.
ENG