Reverse Door - Tecla RD1600H User Manual

ENG

REVERSE DOOR

Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
• Ensure the unit is unplugged and empty.
• To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the
door reversing process.
• All parts removed must be saved to do the reinstallation of the door.
• Do not lay the unit flat as this may damage the coolant system.
• It's better that 2 people handle the unit during assembly.
1
2
3
180°
4
Remove four screws in
top cover and then lift it.
Unscrew top hinge and
unscrew
then remove upper door
and place it on a soft
pad to avoid scratching.
Remove the pin with a
screwdriver and flip the
hinge bracket. Then
refit the pin to hinge
bracket.
Unscrew middle hinge.
Then lift lower door and
place it on a soft pad to
avoid scratching.
5
6
Note: remove this
screw if it is present.
unscrew
Unscrew and remove the bottom hinge pin, turn the bracket over
and replace it.
8
4
Move the hinge hole
covers from left side to
right side.
Unscrew bottom hinge.
Then remove the
adjustable feet from both
sides.
7
screw
Refit the bracket fitting
the bottom hinge pin.
Replace both adjustable
feet. Transfer the lower
door to the property
position.