Removing Jammed Paper - Ricoh Pro C7200 Series Cip Training

CIP Training Pro C7200 series
Throughput
Paper path and clearing misfeeds

Removing Jammed Paper

• Some of this machine's internal components get very hot. For this reason, take care when
removing misfed paper. Not doing so could result in burns.
• Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or
pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.
• When removing jammed paper, make sure not to trap or injure your fingers.
• Keep your hands clear of the inside of the ring binder and the space under the ring binder tray.
You can trap your fingers if you do not.
• When removing paper misfeeds, do not turn off the power. If you do, the configured functions and
values will be lost.
• To prevent paper misfeeds, do not leave any torn scraps of paper inside the machine.
Locating jammed paper
A misfeed has occurred in the place corresponding to the letter displayed on the control panel.
Open the front cover at the location indicated by the displayed letter, and check for a paper jam. If a
lamp is lit, open the guide plate at the location indicated by the lamp, and check for a paper jam.
DWP558