Table of Contents
Advertisement
30
www.aeg.com
Problem
The App cannot
connect to the
dryer.
The App fre-
quently cannot
connect to the
dryer.
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on. Select a new
program. Push the Start/Pause button. If the appliance does not operate contact the service centre and
provide the error code.
2) Follow the program description — see PROGRAMS chapter
3) See chapter CARE AND CLEANING
4) See HINTS AND TIPS chapter
5) Note: After a maximum of 5 hours the drying cycle ends automatically.
17. TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Total power
Possible cause
1)
Disrupted wireless signal.
A new home router has been in-
stalled or the router configuration
has been changed.
The wireless signal does not reach
the dryer.
The wireless signal is disrupted by
microwave.
Check if your smart device is con-
nected to the wireless network.
Check your home network and
router.
Restart the router.
Contact your wireless service pro-
vider if there are problems with the
wireless network.
The dryer, the smart device, or
both, need to be configured again.
Try to move the home router as
near the dryer as possible or con-
sider purchasing a wireless range
extender.
Turn the microwave off. Avoid us-
ing the microwave and the Remote
Control of the dryer at the same
time. The microwaves disrupt the
Wi-Fi signal.
850 x 600 x 630 mm (maximum 660 mm)
1100 mm
950 mm
850 mm (+ 15 mm - feet regulation)
118 l
8 kg
230-240 V
50 Hz
700 W
Remedy
Advertisement
Table of Contents
