Machine Settings - AEG T9DHA866C User Manual

1h20min
Finished at 15:18
Child lock option activation:
At any time during the drying you can
activate the child lock option.
1. Tap on the option
the option list.
2. Tap on the child lock
The option
child lock
1h20min
Finished at 15:18
To deactivate the child lock option tap
on and hold the child lock
seconds.
12.8 Program change
To change a program:

13. MACHINE SETTINGS

In the programs screen scroll up or down
to find machine settings, and tap on the
icon to get to the settings list.
Cottons
Drying
icon to get to
option.
icon will change into the
icon.
Cottons
Drying
icon a few
1. Push the On/Off button to turn the
appliance off.
2. Push the On/Off button again to turn
on the appliance.
3. Set a new program.
12.9 Program end
Clean the filter and drain the
water container after each
drying cycle. (See chapter
CARE AND CLEANING.)
If the drying cycle is finished, the symbol
0 appears on the display. If the
End Buzzer option is activated, the
acoustic signal sounds intermittently for
1 minute.
If you do not turn off the
appliance, the anti-crease
phase starts (not active with
all programs). Laundry can
be removed during this
phase.
At the end of the anti-crease
phase the display tells that
the anti-crease phase is
finished and shows 0h00min
To remove the laundry:
1. Push the On/Off button for 2
seconds to turn the appliance off.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
13.1 Set Clock
You can change the clock each time you
want.
To change the time:
ENGLISH 21
Cycle