Table of Contents
Advertisement
Problem
The filter is clogged.
The load is too large.
The laundry was not spun sufficiently.
Drying cycle too
5)
long
Too low or too high room temperature - this
is not the appliance malfunction.
1)
Follow the program description — see the PROGRAMS chapter .
2)
See the
CARE AND CLEANING chapter.
3)
Only dryers with the Dryness Level option.
4)
See the HINTS AND TIPS chapter .
5)
Note: After a maximum of 6 hours the drying cycle ends automatically.
11.3 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter makes
drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.
12. TECHNICAL DATA
Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Total power
Energy efficiency class
Energy consumption on the standard cotton pro‐
gramme with the full load.
Energy consumption on the standard cotton pro‐
gramme with the partial load.
26
ENGLISH
Possible cause
1)
2)
Clean the filter.
Do not exceed the maximum load size.
Spin the laundry well in the washing ma‐
chine.
Ensure a room temperature higher than
+5°C and lower than +35°C. Optimal room
temperature to achieve best drying results
is between 18°-25°C.
• Inadequate default dryness level settings.
Adjustment of default dryness
See chapter
level
• Room temperature is too low or too high.
Optimal room temperature is between
18°-25°C.
850 x 596 x 650 mm (maximal 663 mm)
1102 mm
951 mm
850 mm (+ 15 mm - feet regulation)
118 l
9,0 kg
230 V
50 Hz
64 dB
550 W
A+++
1,64 kWh
0,84 kWh
Remedy
Advertisement
Table of Contents
