Test Interface Options - Textron Greenlee Communications DataScout 10G User Manual

Test Interface Options

At least one interface option must be specified
ETHERNET (DS10-HW-ETH)
Available on all DS10G Analyzers
INTERFACES
Electrical:
RJ45 (2) 10/100/1000BaseT
Optical:
SFP (2) 100/1000BaseX
SFP+ (2) 10000BaseX
Safety: Laser Tx on/off control
STANDARDS
IEEE 802.3-2008 (I, U, X, Z, AB-E, AN, AQ)
BERT (QUICK TEST)
Layers: L2
Tests:
Throughout
Proper Test Configuration
Frame Size:
Fixed: 64B-1518KB
Random
Payload:
Incremental Data
PRBS-23
T1-Payload (Requires DS10G-HW-EBM)
Results:
Frames Transmitted, Frames Received, Frame Check Sequence Errors, Octets Transmitted, Octets Re-
ceived, Tx PAUSE CONTROL Frames, Rx PAUSE CONTROL Frames, Frames with Rx Errors, Frames
with Tx Errors, UNICAST Packets Rcvd, MULTICAST Packets Rcvd, BROADCAST Packets Rcvd,
UNICAST Packets Sent, MULTICAST Packets Sent, BROADCAST Packets Sent, Ethernet Frames
Dropped, Total Octets Received Total Packets Received, Number of Frames Received in each size-
range, Undersized, Oversized, <64 octets, 65-127 octets, 128-255 octets, 256-511 octets, 512-1023 oc-
tets, 1024-1518 octets, 1519-max octets, Jabbers, Fragments
LOOPBACK
Port B: Layers 1, 2
RFC-2544
Layers: L2
File formats: CSV, PDF
Tests:
Throughout
Latency
Frame Loss
Back to Back (burst)
Modes:
Port A (local) to Port B (local)
Port A (local) to Port B (remote)
Result Report:
Test Result Summary:
System and Test Configuration
Mode, Physical Interface, Ethernet Speed, Auto-Negotiation, Duplex Mode, Flow Control, Negotiated
Link State
SFP+ Information:
Test Port, Identifier, Connector Type, Vendor Name, Vendor OUI, Part Number, Revision, Serial-
Number, Mfg Date code, Diagnostic Support
Throughput & Frame Loss Tests
Users Manual
DataScout 10G & 10Gx
103