Occupacy Schedule (Figure 10) - Desert Aire CM3560 Series Installation And Operation Manual

Pressing the DOWN key will display the screen shown in Figure 9. This screen
will show the EXV of Circuit B along with the superheat, suction temperature,
suction pressure suction P2T, steps and percent open of the EVX. This screen
is for troubleshooting only. To return to the STATUS MENU, press the Esc key.

2.3.2 Occupacy Schedule (Figure 10)

Select the OCCUPANCY SCHEDULE from the MAIN MENU to enable a
schedule to place the dehumidifier in the occupied mode. See Figure 10. To
enable a schedule, select 'Yes', and press ENTER. The schedule will need to
be setup before this will be enabled. Pressing the Prg key from this menu
allows the date and time to be modified. To return to the MAIN MENU, press the
Esc key.
Figure 8
Figure 9
Figure 10
Desert Aire - CM3560 Manual
17