Omron BP7350CAN Instruction Manual page 23

3. Using Your Monitor without a Smart Device
3. Press the [START/STOP] button to turn your
monitor off.
Note
• Your monitor automatically turns off after 3 minutes.
• Wait 2 - 3 minutes between measurements. The wait time
allows the arteries to decompress and return to their pre-
measurement state. You may need to increase the wait time
depending on your individual physiological characteristics.
 Using the Guest Mode
Your monitor stores readings for 2 users in the memory. The guest
mode can be used to take a single measurement for another user.
Note
•No readings are stored in the memory.
1. Press and hold the
[START/STOP] button
for more than
3 seconds.
The user ID symbol and the date/time display will disappear.
2. Release the [START/STOP] button when the
user ID and date/time display turn off.
The arm cuff automatically starts to inflate.
22