Omron BP7350CAN Instruction Manual page 17

2. Preparation
3. Press the
month will flash. Repeat the same steps to
adjust the month, day, hour, and minute.
4. Press the
Your monitor automatically turns off 3 seconds after the
minutes have been set in this sequence.
Note
•If you need to reset the date and time, replace batteries or press the
button, then set the date and time as shown in above steps.
•If the date and time are not set, "
measurement.
16
button to confirm the year, then the
Year
button to store the setting.
Month
Day
Hour
Minute
" flashes during or after