Table of Contents
Advertisement
CONNECTING USING AP MODE (ALTERNATIVE METHOD)
Before initiating the connection, make sure the unit is in standby mode, with the WIFI light flashing once
per second. If not follow the instructions for changing the WIFI connection mode. Also ensure your phone
is connected to the WIFI network. (We advise turning mobile data off during setup)
1. Open the app and press "+"
to add device
4. Ensure the WIFI light on the
air conditioner is slowly
flashing (once per three
seconds), then select AP
Mode in the top right corner
before pressing on the orange
button at the bottom of the
screen to confirm
This will then transfer the settings to the air conditioner.
Once the connection process has completed, go back to the network settings on your phone to
ensure your phone has reconnected to your WIFI router.
2. Select the type of device
as "Air Conditioner (WIFI)"
within the Large Home
Appliance tab.
5. Go to network settings in your
phone and connect to the
"SmartLife xxx" connection.
then press on the orange
button at the bottom of the
screen to confirm
13
3. Select your network, enter
your WIFI password and
press Next.
6. Go to network settings in your
phone and connect to the
"SmartLife xxx" connection.
There is no password to
enter. Then return back to
the app to complete setup.
Advertisement
Table of Contents
