- Follow the (Step 1) - (Step 2) of Item 12.3.
- Follow the (Step 1) - (Step 6) of Item 12.4.
Step 1 Pull out the FFC from connector. (CN2010)
Step 2 Hold gear, push and release the 2 claws in the direction of arrow.
12.6. Disassembling the Mechanism Base Block
- Follow the (Step 1) - (Step 2) of Item 12.3.
- Follow the (Step 1) - (Step 6) of Item 12.4.
- Follow the (Step 1) - (Step 2) of Item 12.5.
Step 1 Remove 4 screws and unlock the lock.
Step 2 Detach FFC cable at connectors (CN2004,CN2011).
Step 3 Remove mechanism base block.
12.7. Disassembling the Main P.C.B
- Follow Item 11.6.
Step 1 Unlock the claw and remove 9 screws.
Step 2 Remove the main P.C.B.
23