Panasonic SA-HT930GC Service Manual page 27

Step 3 Rotate close lock gear to direction of arrow, press claw (b) and pull out close lock gear.
12.12. Removal of the Tray Motor P.C.B. and Sensor P.C.B.
- Follow the (Step 1) - (Step 2) of Item 12.3.
- Follow the (Step 1) - (Step 6) of Item 12.4.
- Follow the (Step 1) - (Step 2) of Item 12.5.
Step 1 Remove 2 screws.
Step 2 Release 4 claws at Tray Motor P.C.B. and Sensor P.C.B.
12.13. Removal of the Traverse Unit
- Follow the (Step 1) - (Step 2) of Item 12.3.
- Follow the (Step 1) - (Step 6) of Item 12.4.
- Follow the (Step 1) - (Step 2) of Item 12.5.
- Follow the (Step 1) - (Step 3) of Item 12.6.
Step 1 Rotate cam gear anti-clockwise. (Align at position (A) as marking on gear with arrow)
27