arrow.
Step 2 Detach the FFC cable from connector (CN5702).
Step 3 Remove the tray assembly in the direction of arrow.
Caution: Avoid using excessive strong force when removing the tray assembly.
10.6. Disassembling the Rear Panel
- Follow (Step 1) to (Step 2) of Item 10.3.
Step 1 Remove 7 screws.
Step 2 Detach the FFC cable from connector (CN5704).
Step 3 Release the claws of the rear panel in the directions.
Step 4 Remove the rear panel in the direction of arrow.
10.7. Disassembling the Mechanism Base
- Follow (Step 1) to (Step 3) Item 10.5.
Step 1 Remove 2 screws on each side of the mechanism base block.
Caution: Take note of the screw type used. During assembling, use the correct screw type and at
the correct location.
Step 2 Remove the tab.
Step 3 Detach FFC cables at connectors (CN2005 & CN2001).
30