Vinotemp DESIGNER Series Manual page 17

Vinotemp International ● 17621 S. Susana Road, Rancho Dominguez, CA 90221
• The electricity is off.
• The room temperature
The ice maker
stops suddenly
while making ice.
• The ice storage bin is
The body of the • The ground line isn't in
ice maker is
electrified
Scaling occurs • The hardness level of
frequently inside
the machine.
• The drain hole below
Water leaks from
• The drain hose is
the ice storage
bin
is out of the stated
range.
full of ice.
the socket.
the water is too high.
the ice storage bin is
blocked
kinked or improperly
placed higher than the
floor of the ice storage
bin.
• Reconnect the power supply line.
• Cut off the electricity and leave the
ice maker disconnected until the
temperature returns to within the
stated range.
• Remove some ice cubes; make sure
the ice-full probe is free of ice.
• Use a socket meeting the grounding
requirements.
• Install a water-softening device in
front of the water inlet.
• Remove the ice storage bin and
clean the drain hole.
• Check the drain hose to be sure
water can be drained out
unhindered.
17