Elite Screens TE100HC2 Features

Total Control
• Standard Infrared (IR) remote control with extended operational range and Optional
Elite ZR800D Universal Learning Remote Control
• Standard Radio Frequency (RF) remote control-operational range of
100' does not require line of sight operation
• Low Voltage 3-way wall switch or extended IR
"eye" sensor provides additional control
options
• Built-In 5-12 Volt Trigger synchronizes screen
drop/rise with projectors power cycle
• Optional Wireless 5-12V trigger available
• Optional In-Wall Wireless 3-way Switch
Premium Screen Material
• CineWhite
™ PVC tension material provides uniform
flatness in a versatile material making it a favorite for
consumers and installers alike
• 160˚ Wide Viewing Angle with 1.1 Gain for either Home
Cinema or Commercial Presentations
• All CineTension2 Series Screen surfaces regardless to
size are seamless
• AcousticPro™ Acoustically transparent fabrics are
available with specific models
Easy Installation
• Alumiumn Housing with Enamel Coating is moisture resistant.
Floating brackets is made for versatile wall & ceiling installations
• Tubular motor provides superior timing and lift capacity for sizes up to 350" (16:9) Adjustable
vertical limit switch regulates screen drop/rise settings
• Optional In-Ceiling Trim Kits for all sizes available
• Shipped fully assembled ready to plug & play with installation kit containing bracket, wall screws and bubble level
Our Commitment-2 Year Manufacturer's Warranty which is double the industry standard
Standard IR & RF remotes and built-In Infrared & Radio Frequency
Receivers support your Screens On-wall or In-Ceiling application for
a clean appearance. A Low Voltage Controller (LVC) is included with
5-12V trigger port (RJ45) that can be connected to your projector
Trigger port. This enables synchronization between the drop/rise
cycle of your screen and the power cycle of the projector. You could
extend this port using a standard RJ45 connector and CAT-5 cable
to anywhere in the room. Or mount your Wall-switch like a regular
light Switch.
Extra Eye IR Receiver can be extended when screen is recessed
into ceiling and can still be controlled with your IR remote or Univer-
sal Learning Remote Control.
Optional Control Accessories: 1. Wireless (RF) 5-12V Trigger, 2.
In-Wall Wireless RF 3-Way Wall Switch. 3. In-Wall 3-Way Wire wall
switch (CAT5 Ethernet cable) 4. CAT5 50 feet cable (F to M) for
extending the IR receiver or 3-Way Wall Box 5.Elite ZR800D Univer-
sal Learning Remote Control
www.elitescreens.com
031
CineTension2 Series
• Tab-Tension Electric Screen
• Premium Grade Tension Electric Screens