Table of Contents
Advertisement
Figure 34
E
E
Figure 35
Figure 36
Figure 37
36
D
F
F
H
G
TOP OVEN DOOR - REPLACING
THE INNER PANE OF GLASS
1.
Make sure the door is locked open
(see fig. 29).
2.
Replace the inner pane:
■
Check that the four rubber pads are in
place ("D" in fig. 34).
■
Check that you are holding the pane
the correct way. You should be able to
read the wording on it as it faces you.
■
Insert the pane in the left "E" and right
"F" slide guides (fig. 35), and gently
slide it to the retainers "H" (fig. 36).
■
Replace the seal "G" by hooking in the
three fixing hooks (fig. 37). Make sure
that you put it in the correct way (detail
of fig. 37).
■
Unlock the oven door by opening it
completely and closing the lever "A"
on the left and right hinges (fig. 38).
The top oven
door has a
sealed
gasket
in the
top part.
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
Figure 38
A
Advertisement
Table of Contents
