Table of Contents
Advertisement
TELESCOPIC SLIDING SHELF SUPPORTS
The telescopic sliding shelf supports make it safer and easier to insert and remove the
oven shelves and trays. They stop when they are pulled out to the maximum position.
Important! When fitting the sliding shelf supports, make sure that you fit:
■
The slides to the top wire of a rack. They do not fit on the lower wire.
■
The slides so that they run out towards the oven door.
■
Both sides of each pair of shelf slides.
■
Both sides on the same level.
To fix the sliding shelf supports onto the side racks:
■
Screw the side racks onto the oven wall interposing the catalytic panels (fig. 7b).
■
Fit the sliding shelf supports onto the top wire of a rack and press (fig. 12). You will
hear a click as the safety locks clip over the wire.
Figure 12
Left
Right
17
Advertisement
Table of Contents
