Honda CB110C3M Manual page 89

#
Headlight bulb
"TOP" mark
Rubber dust
cover
1. Remove the headlight case.
2. Remove the rubber dust cover.
3. Press the pin down and pull out the bulb
without turning it.
4. Install a new bulb and parts in the reverse
order of removal.
Install the dust cover with its "TOP"
u
mark facing up.
Do not touch the glass surface with your fingers.
If you touch the bulb with your bare hands,
clean it with a cloth moistened with alcohol.
Pin
Bulb
P. 49
2
Electrical Trouble
#
Brakelight/Taillight Bulb
1. Remove the taillight lens by removing the
screws.
2. Slightly press the bulb and turn it
counterclockwise.
3. Install a new bulb and parts in reverse
order of removal.
Burned-out Light Bulb
u
Bulb
Lens
Screws
continued
87