Honda CB110C3M Manual page 73

Side Stand Adjusting the Drive Chain Slack
►
#
Checking the Drive Chain Wear
Check the chain wear label when adjusting the
drive chain. If the index mark of the adjusting
plate enters the red zone on the label after the
chain has been adjusted to the proper slack,
the chain is excessively worn and must be
replaced.
Drive chain must be replaced with new
sprocket set.
Chain: DID420 ADV
LGBR420OR
If necessary have the drive chain replaced by
your dealer.
Red zone
Chain wear label
Adjusting plate
Index mark
71