Samsung SR8848 User Manual page 195

Safety information
IN USE
Robotic vacuum cleaner cannot completely clean
locations that it cannot reach, such as corners, and
NOTE
spaces between sofas and walls.
- Please clean these locations occasionally.
Dust clusters may remain after cleaning, when the robotic vacuum cleaner fails to
pick up dust clusters that were formed while cleaning.
NOTE
- In this case, sweep up the dust with another cleaning tool.
CLEANING AND MAINTENANCE
When cleaning the product, do not spray water directly onto the
exterior or wipe it with a volatile material such as benzene,
CAUTION
thinner or alcohol.
- This may result in critical damage to the product.
Do not forcefully press the bumper on the robotic vacuum
cleaner.
CAUTION
- If the bumper sensor gets damaged, the robotic vacuum cleaner may
bump into walls or furniture.
The unit must not be disassembled or reconstructed by anyone
other than a qualifi ed service engineer.
CAUTION
- This may result in damage to the product.
Remove any foreign substances accumulated on the Obstacle
and Cliff sensors on a regular basis.
WARNING
- Dirt accumulated on the sensors will result in inaccurate functioning
of the sensors.
Cliff sensor
Obstacle
sensor
Safety information _11