Table of Contents
Advertisement
Peripheral equipment must be appropriate for the application and location.
•
1.3
During Use
Keep the operator panel clean.
•
Emergency stop and other safety functions may not be controlled from the
•
operator panel.
Do not use too much force or sharp objects when touching the keys,
•
touchscreen etc.
1.4
Service and Maintenance
Only qualified personnel should carry out repairs.
•
The agreed warranty applies.
•
Before carrying out any cleaning or maintenance operations, disconnect the
•
equipment from the electrical supply.
Clean the display and surrounding front cover with a soft cloth and mild
•
detergent.
Replacing the battery incorrectly may result in explosion. Only use batteries
•
recommended by the supplier. During the warranty period, the battery needs
to be replaced by an authorized Beijer Electronics service center.
The unit can be reset by using the reset switch located behind the fan.
•
1.5
Dismantling and Scrapping
The operator panel or parts thereof shall be recycled according to local
•
regulations.
The following components contain substances that might be hazardous
•
to health and the environment: lithium battery, electrolytic capacitor and
display.
1.6
Appearance of Air in Touch Screen
The layer structure of the touch screen contains air and in rare cases
•
appearance of bubbles can arise. This is purely cosmetic and does not affect
any functionality of the panel. The appearance can occur under certain
environmental conditions such as temperature, humidity, and atmospheric
pressure.
Beijer Electronics, MAEN083D
Safety Precautions
5
Advertisement
Table of Contents
Need help?
Do you have a question about the iX T15C and is the answer not in the manual?