AEG LF8C9412AC User Manual page 30

30 www.aeg.com
12.10 Interrupting a program
and changing the options
When the program is running, you can
change only some options:
1. Touch the Start/Pause
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause
again.
The washing program continues.
12.11 Cancelling a running
program
1. Press the On/Off button to cancel the
program and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
program.
If the ProSense phase is
already carried out and the
water filling is already
started, the new program
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
the maximum duration of the
program, updating it about 20
minutes after the starting of
the new program.
12.12 Opening the door -
Adding garments
While a program or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
1. Touch the Start/Pause
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pause
button.
The program or the delay start
continues.
4. The door can be opened when the
program is complete. You may also
set a spinning or draining program/
button
option and than press
Start/Pause
and drain programs are not available
in the program dial, they can be set
via App.
12.13 End of the program
When the program has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start/Pause
button goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off button to deactivate
the appliance.
After five minutes from the end of the
program, the energy saving function
automatically deactivates the appliance.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
button.
button. If the spin
When you activate the
appliance again, the display
show the end of the last
selected program. Turn the
program dial to set a new
cycle.
button.