Table of Contents
Advertisement
18
www.aeg.com
If the Extra Rinse is set as a
default option and you select
a compatible washing
program, the display
shows
pressing the Extra Rinse
button , it is possible to add
just one rinse.
7.7 Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing program.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
The indicator
during steam phase.
This option can increase the
program duration.
When the program stops the display
shows a zero
steady on and the indicator
flashing. The drum performs smooth
movements for about 30 minutes to keep
the steam benefit. By touching any
button the anti-crease movements stop
and the door unlocks.
A small laundry load helps to
reach better results.
7.8 Eco
Set this option for slightly or normally
soiled items washed at 30°C or higher
temperatures.
The appliance decreases the washing
temperature and extends the washing
time to obtain a good washing efficiency
by saving energy. The display shows the
indicator
7.9 Time Save
With this option you can decrease the
program duration.
• If your laundry is normally or lightly
soiled, it may be advisable to shorten
the washing program. Touch this
button once to decrease the duration.
. In this case, by
flashes on the display
, the indicator
is
starts
.
• In case of smaller load, touch this
button twice to set an extra quick
program.
The display shows the indicator
This option can also be used
to shorten the Steam
program duration.
7.10 Skipping phase button
(Options)
By touching this button you can set:
• Rinse only at first touch. The washing
program starts from the rinsing phase
by skipping the wash phase.
All set options (except
permanent extra rinse)
are deselected
automatically.
• Spin only at second touch. The
appliance skips wash and rinse
phase.
• Drain only at third touch. The
appliance performs only the drain
phase.
At firth touch the appliance
proposes the default setting
of the washing program
again.
7.11 Delay Start
With this option you can delay the start of
a program in a more convenient time.
Touch the button repeatedly to set the
required delay. The time increases by
steps of 30 minutes up to 90' and from 2
hours up to 20 h.
After touching the Start/Pause
button, the display shows the indicator
and the selected delay time and the
appliance begins the countdown.
7.12 Start/Pause
Touch the Start/Pause
start, pause the appliance or interrupt a
running program.
.
button to
Advertisement
Table of Contents
