Before First Use; Settings - AEG LF8C9412AC User Manual

10. BEFORE FIRST USE

During installation or before
first use you may observe
some water in the appliance.
This is a residual water left
in the appliance after a full
functional test in the factory
to ensure the appliance is
delivered to customers in
perfect working order and is
no cause for concern.
1. Make sure that all transit bolts have
been removed from the appliance.
2. Make sure that the electrical power is
available and the water tap is open.
3. Remove the folded tag in the
detergent compartment marked by
. This tag suggests to use the
right amount of detergent or softener
for avoiding overdosing.

11. SETTINGS

11.1 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
touch the Stains/Prewash and the
Extra Rinse buttons simultaneously
until the indicator
off on the display.
You can activate this option:
• After you touch the Start/Pause
button: all the buttons and the
program dial are deactivated
(except On/Off button ).
• Before you touch the Start/Pause
button: the appliance cannot start.
The appliance keeps the selection of this
option after you switch it off.
11.2 Acoustic signals
This appliance is provided with different
acoustic signals, that operate when:
• You activate the appliance (special
short tune).
• You deactivate the appliance (special
short tune).
comes on/goes
4. Pour 2 litres of water into the
detergent compartment marked by
.
This action activates the drain system.
5. Set and start a program for cotton
at the highest temperature without
any detergent and laundry in the
drum.
• You touch the buttons (click sound).
• You make a wrong selection (3 short
sounds).
• The program is completed
(sequence of sounds for about 2
minutes).
• The appliance has a malfunction
(sequence of short sounds for about 5
minutes).
To deactivate/activate the acoustic
signals when the program is
completed, touch the Extra Rinse and
the Delay Start buttons simultaneously
for about 6 seconds.
If you deactivate the
acoustic signals, they
continue operate when the
appliance has a malfunction.
11.3 Permanent Extra Rinse
With this option you can permanently
have an extra rinse when you set a
program where it is selectable.
• To activate/deactivate this option
touch the Extra Rinse button and the
Options button simultaneously the
ENGLISH 25