AEG LF8C9412AC User Manual page 24

24 www.aeg.com
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator
the connection is ready.
To switch the wireless connection off,
press and hold the Time save and the
Options buttons simultaneously for a few
seconds until the first acoustic signal:
appears on the display for 5
seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the Time save and the
Options buttons simultaneously for 10
seconds until the second acoustic signal:
appears on the display.
9.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
program, but it is also
possible to start a washing
program remotely. This
function is deactivates when
door is open.
stops blinking
button to start the
When the App is installed and the
wireless connection is complete, you
can activate the Remote Start:
Press and hold the Eco and the Time
save buttons simultaneously for a few
seconds. The indicator
display and the door is locked. Now it is
possible to start the program remotely.
To remove the Remote Start, press and
hold the Eco and the Time save buttons
simultaneously for a few seconds until
the indicator disappears on the
display.
9.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a program is running, the App notifies
that the update will start at the end of the
program.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
buttons or turn the knob to return to
normal use.
appears on the