AEG LF8E8411A User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. LF8E8411A
  6. User manual

AEG LF8E8411A User Manual

Hide thumbs Also See for LF8E8411A:
Table of Contents

Advertisement

Quick Links

See also: User Manual
LF8E8411A
USER
MANUAL
EN

User Manual

Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG LF8E8411A

Summary of Contents for AEG LF8E8411A

  • Page 1: User Manual

    LF8E8411A User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    17. WARRANTY ......................35 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Conditions Of Use

    The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must •...

  • Page 5: Installation

    ENGLISH • Always use a correctly installed • This appliance is for household use shockproof socket. only. • Make sure that the parameters on the • Follow the safety instructions on the rating plate are compatible with the detergent packaging. electrical ratings of the mains power •...
  • Page 6 5. Carefully put down the appliance WARNING! with the rear side on it. Use the gloves. 6. Put the front polystyrene packaging element on the floor under the 1. Remove the external film. If appliance. necessary, use a cutter.

  • Page 7: Positioning And Levelling

    ENGLISH WARNING! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. 10. Remove the three bolts by using the key supplied with the appliance. The appliance must be level and stable. 11. Pull out the plastic spacers. A correct adjustment of the 12.

  • Page 8: Water Drainage

    If this occur, close the water tap and contact the authorized service centre to replace the hose. 4.5 Water drainage The drain hose should stay at a height of not less than 60 cm and not more than Make sure that the inlet hose 100 cm.

  • Page 9: Product Description

    ENGLISH 5. Without the plastic hose guide, to a sink spigot - Remove the plastic Make sure that the drain membrane from the sink trap spigot. hose end is not immersed in 6. Connect the drain hose to the spigot the water.
  • Page 10 The washing programme is tailored to the fibres and reduces fabric creasing. the laundry load and the type of fabric Ironing will be easier! without consuming more time, energy • The Stain option pre-treats stubborn and water than necessary.

  • Page 11: Control Panel

    ENGLISH 6. CONTROL PANEL 6.1 Control panel description 11 10 Programme dial Delay start touch button Display Soft Plus touch button Eco touch button Spin reduction touch button Time Save touch button • Rinse Hold option Rinse touch button • Extra Silent option •...

  • Page 12: Dial And Buttons

    Maximum load indicator. The indicator flashes during the laundry load estimation (refer to ProSense load detection paragraph) . Maximum laundry indicator. It blinks if the laundry amount exceeds the declared load. Door locked indicator. Delay start indicator. The digital indicator can show: •...
  • Page 13 ENGLISH As the Stand-by function automatically turns regularly to reduce creasing. deactivates the appliance to decrease You must drain the water to unlock the energy consumption in a few cases, the door. you may need to activate the appliance If you touch the Start/Pause button, again.

  • Page 14: Delay Start

    30 minutes up to 90' and from 2 If it is necessary to reduce hours up to 20 h. the spin speed, select a programme with a lower After touching the Start/Pause button, spin speed as default.

  • Page 15: Programmes

    ENGLISH 7.11 Start/Pause The appliance decreases the washing temperature and extends the washing Touch the Start/Pause button to start, time to obtain a good washing efficiency pause the appliance or interrupt a by saving energy. The display shows the running programme. indicator 8.
  • Page 16 Programme Programme description White cotton items. This programme removes micro-organ- isms thanks to a washing phase with the temperature main- Anti-Allergy tained above 60°C for some minutes. This helps in removing germs, bacteria, micro-organism and particles. An additional rinsing phase ensures a proper removal of detergent residues and pollens/allergenic items.
  • Page 17 ENGLISH Programme temperature, maximum spin speed and maximum load Programme Default tempera- Maximum spin speed Maximum ture Spin speed range load Temperature range Washing programmes 40 °C 1400 rpm Cottons 8 kg 95 °C - Cold 1400 rpm - 400 rpm 40 °C 1200 rpm 3 kg...
  • Page 18 Programme options compatibility Options ■ ■ ■ ■ ■ ■ ■ ■ ■ Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Drain Only ■ ■ ■ ■ ■ ■...

  • Page 19: Settings

    ENGLISH 8.2 Woolmark Apparel Care - Company for the washing of wool garments labelled as «hand wash» Blue provided that the garments are washed according to the instructions issued by the manufacturer of this washing machine. Follow the garment care label for drying and other laundry instructions.

  • Page 20: Before First Use

    10. BEFORE FIRST USE 1. Make sure that all transit bolts have This action activates the drain system. been removed from the appliance. 4. Set and start a programme for cotton 2. Make sure that the electrical power is at the highest temperature without available and the water tap is open.
  • Page 21 ENGLISH Maximum level for quantity of liquid additives. Compartment for stain remover. Flap for powder or liquid detergent. Always follow the instructions that you find on the packaging of the detergent products, but we recommend that you do not exceed the maximum 4.

  • Page 22: Setting A Programme

    The drain pump can operate shortly before the appliance fills water. 11.7 Starting a programme with the delay start 1. Touch the Delay Start button repeatedly until the display shows the desired delay time. The indicator comes on. 2. Touch the Start/Pause button.
  • Page 23 ENGLISH 11.9 Programme phase After touching the Start/Pause button, the maximum declared load indicator indicators goes off, the indicator flashes, the When the programme starts the indicator ProSense starts the laundry load of the running phase flashes and the detection: other phase indicators are steady on.

  • Page 24: Opening The Door

    11.11 Cancelling a running In the display all washing phase indicators become steady and the time programme area shows . 1. Press the button On/Off to cancel The indicator of the Start/Pause button the programme and to deactivate goes off.

  • Page 25: Hints And Tips

    ENGLISH • You do not use the appliance for 5 • If you have set , the appliance minutes before you touch the Start/ only drains the water. Pause button. The option indicator goes out, Press the button On/Off to activate the appliance again.

  • Page 26: Water Hardness

    12.3 Detergents and other • Always start a washing programme with the maximum load of laundry treatments allowed. • If you pre-treat the stains, you can use • Only use detergents and other a stain remover when you set a treatments specially made for programme with a low temperature.

  • Page 27: Door Seal

    ENGLISH 13.6 Cleaning the detergent Always follow the dispenser instructions that you find on the packaging of the To prevent possible deposits of dried product. detergent or clotted fabric softener and/or formation of mould in the 13.3 Maintenance wash detergent dispenser drawer, once in a while carry out the following cleaning The repeated and prolonged use of low procedure:...

  • Page 28: Cleaning The Drain Pump

    WARNING! • Do not remove the filter while the appliance operates. • Do not clean the pump if the water in the appliance is hot. Wait until the water cools down Proceed as follows to clean the pump: 1. Open the pump cover.
  • Page 29 ENGLISH 5. When the bowl is full of water, close the drainage duct back and empty the container. 6. Repeat the steps 4 and 5 until the water stops to flowing out. 11. Put the filter back into the special guides by turning it clockwise.

  • Page 30: Emergency Drain

    13.8 Cleaning the inlet hose and the valve filter It is recommended to clean both the filters of the inlet hose and valve occasionally to remove any deposit, collected over the time: 1. Remove the inlet hose from the tap and clean the filter.

  • Page 31: Troubleshooting

    ENGLISH 14. TROUBLESHOOTING WARNING! Refer to Safety chapters. 14.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre.
  • Page 32 Problem Possible solution • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged.

  • Page 33: Emergency Door Opening

    ENGLISH Problem Possible solution • Make sure the levelling of the appliance is correct. Refer to The appliance makes an 'Installation instruction'. unusual noise and vi- • Make sure that the packaging and/or the transit bolts are brates. removed. Refer to 'Installation instruction'. •...

  • Page 34: Technical Data

    2. Disconnect the mains plug from the 5. Take out the laundry and then close mains socket. the appliance door. 3. Open the filter flap. 6. Close the filter flap. 4. Keep the emergency unlock trigger pulled downward and, at the same time, open the appliance door.

  • Page 35: Accessories

    This document sets out the terms and the ACL; conditions of the product warranties b) ‘ACL’ means Schedule 2 to the for AEG Appliances. It is an important Competition and Consumer Act document. Please keep it with your 2010; proof of purchase documents in a safe c) ‘Appliance’...
  • Page 36 ‘ASC’ means AEG authorised globes, batteries, filters or similar service centres; perishable parts. e) AEG is the brand controlled by 4. Parts and Appliances not supplied by Electrolux Home Products Pty Electrolux are not covered by this Ltd of 163 O’Riordan Street, warranty.
  • Page 37 Appliance. terms of this warranty; 10. For AEG Appliances and services in b) have the model and serial Australia, the Appliances come with a number of the Appliance guarantee that cannot be excluded available;...

  • Page 38: Environmental Concerns

    Australia PLEASE CALL 13 13 50 OR EMAIL customercare@aegaustralia.com.au For the cost of a local call (Australia only) AEG SERVICE NEW ZEALAND www.aeg.co.nz FOR SERVICE or to find the address of your nearest authorised service centre in New Zealand FREE CALL 0800 10 66 10 OR EMAIL customercare@electrolux.co.nz...
  • Page 39 (c) cosmetic damage which does not affect the operation of the Appliance; This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof (d) damage to the Appliance caused by: of purchase documents in a safe place for future reference should there be a (i) negligence or accident;...
  • Page 40 www.aeg.com/au...

Table of Contents