Connecting Usb - Tesla 32D615BHS Quick Start Manual

MEDIA

Connecting USB

Tips for Using a USB Storage Device
A USB storage device that has a built-in automatic
recognition programme or uses its own driver might
not be recognisable.
Some USB storage devices may not be supported or
may not work properly.
If you use a USB extension cable, the USB storage
device may not be recognised or may not work
properly.
Please use only USB storage devices formatted with
the FAT32 or NTFS file system provided by Windows
OS.
It is recommended that you use an external USB HDD
with a rated voltage of 5 V or less and a rated current
of 500 mA or less. If you use a device requiring
a higher voltage/current than the rated voltage/
current, it may not operate properly due to lack of
current.
It is recommended that you use a USB hub or USB
storage device with a power supply.
We recommend using a storage device with a
capacity of 32 GB for the USB memory and 2 TB or
less for the USB hard disk.
If a USB HDD with power-saving function does not
work, turn the hard drive off and on again to make it
work properly. See the owner's manual for the USB
HDD for more information.
Connect a USB storage device (USB
HDD, USB stick) to the USB port on the
TV to enjoy the content files stored on
the USB storage device on your TV.
Data on a USB storage device may be damaged, so
it is recommended that you back up any important
files. Users are responsible for data management.
The manufacturer bears no responsibility.
Press the button on the remote control. To
remove the USB storage device, press the Eject
button, which appears at the top when you focus on
the USB storage device you want to remove.
If you disconnect the USB storage device without
selecting Eject, an error may occur in your TV or
storage device.
When you connect a USB storage device of a file
system not supported by the TV to the USB IN port,
the format message appears. To use the connected
USB storage device, you should format the device
first.
After format, all the data of USB storage device will
be deleted and formated as NTFS or FAT32 file
system.
Press and hold the
control. Select the connected USB from Home
Dashboard -> Storage and select the Format button
to format the USB storage device.
When connecting a USB storage device, a random
file/folder can be created to provide Smart TV
services such as the saving and retrieving of
thumbnail images.
11
button on your remote
ENG