Makita DFJ212A Instruction Manual page 11

When storing the battery in the jacket's/vest's
pocket
(Only for the jackets/vests with the hole for direct
access to the pocket)
From the inside of the jacket/vest, pass the end of the
power cable out through the hole in the jacket's/vest's
pocket as shown in the figure.
1
2
► 1. Hole in the pocket 2. Power cable
10. Connect the power cable to the battery holder /
Battery BL1055B.
2
► 1. Battery holder 2. Battery BL1055B
11. Close the zip fastener.
(Skip this step if your jacket/vest does not have the
lining)
CAUTION:
When using the fan jacket/vest,
securely store the battery in the pocket or hook it
on your belt to prevent it from falling.
Follow the installation procedure in reverse when
removing it.
Attaching the filter set
Optional accessory
The filter set protects the fan unit from dust and powder.
We recommend that you use the filter set in a dusty or
powdery work place.
Install the filter attachment between the fan unit and the
ring. Turn the ring clockwise until the triangle marking is
aligned with " I " marking. After that, attach the filter onto
the filter attachment.
6
7
1
► 1. Ring 2. Hole in the jacket/vest 3. Filter attach-
ment 4. Fan unit 5. Filter 6. " I " marking 7. Triangle
marking
NOTICE:
Make sure that the filter fully covers
the filter attachment. For better protection against
dust and powder, tuck the skirt of the filter
between the jacket/vest and filter attachment.
11 ENGLISH
1
2
3
4
5