Operating time Unit: Hour Air speed Battery BL1055B BL1041B BL1430B BL1860B 10.0 10.0 16.0 18.5 12.0 13.5 29.5 40.5 27.5 31.0 68.0 • The operating times in the above table are a rough guideline. They may differ from actual operating times. •...
This appliance is not intended for medical use Do not leave any cord disconnected while the in hospitals. battery power is supplied. Small children may put the live plug in their mouth and cause injury. Do not use the jacket other than for its intended purpose.
It will Do not expose battery cartridge to water also void the Makita warranty for the Makita tool and or rain. charger. A battery short can cause a large current...
PARTS DESCRIPTION Fan unit Power cable Battery holder for CXT Battery holder for LXT battery cartridge * battery cartridge * Battery BL1055B * CXT battery cartridge * LXT battery cartridge * (Country specific) (10.8 V - 12 V max) (14.4 V / 18 V max) * Optional accessory 6 ENGLISH...
Battery pocket Light reflector Hood Shoulder pad Mesh pocket for ice pack Cable hole in the pocket Cable holder Cable hole in the lining (under the lining) Zip fastener (for fan unit Front buckle access) NOTE: The features of the jacket/vest vary depending on the model. Refer to the section for the specifications for the features of your jacket/vest.
Installing or removing the battery INSTALLATION cartridge Charging the battery Only when using the battery cartridge used with battery holder Battery cartridges used with battery holder Refer to the instruction manual of the charger for how to CAUTION: Always switch off the device charge the battery.
Turn the ring counterclockwise and remove it from Attaching the battery holder the fan unit. Only when using the battery cartridge used with battery holder You can hang the battery holder on your waist belt. To prevent the battery holder from dropping acciden- tally, attach a strap using the strap hole and secure it.
From the inside of the jacket/vest, place the ring Connect the power cable to the fan units. onto the fan unit and turn it clockwise until the triangle marking is aligned with " II " marking. ► 1. Power cable 2. Cable holder 3. Zip fastener NOTE: The zip fastener is not provided with the jacket/vest without lining.
When storing the battery in the jacket's/vest's Attaching the filter set pocket (Only for the jackets/vests with the hole for direct Optional accessory access to the pocket) The filter set protects the fan unit from dust and powder. From the inside of the jacket/vest, pass the end of the We recommend that you use the filter set in a dusty or power cable out through the hole in the jacket's/vest's powdery work place.
Indicating the remaining battery FUNCTIONAL capacity DESCRIPTION NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly NOTICE: The fan jacket/vest is effective when from the actual capacity. the humidity and temperature of intake air are lower than those of the body surface.
Battery BL1055B For the jacket with the hood, wear the hood over your helmet. The While the battery BL1055B is unplugged, press the air from the fan goes through the helmet and cools your head. power button. The battery capacity indicator light up for a few seconds.
The battery holder (with the battery) and Battery Front buckle BL1055B can work as an external power supply for USB devices. NOTE: Some jacket/vest does not have the front Open the cover and connect a USB cable (not buckle. Refer to the section for the specifications for included) to the USB port.
To maintain product SAFETY and RELIABILITY, ► 1. Logo on the cover 2. Loop on the housing repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. 15 ENGLISH...
CAUTION: These accessories or attachments • Cotton products may shrink when washed. are recommended for use with your Makita tool • Do not wash the jacket/vest with other clothes. specified in this manual. The use of any other Doing so may cause color fading or color transfer.