Makita DFJ212A Instruction Manual page 9

Attaching the battery holder
Only when using the battery cartridge used with
battery holder
You can hang the battery holder on your waist belt.
To prevent the battery holder from dropping acciden-
tally, attach a strap using the strap hole and secure it.
► 1. Strap hole
The battery holder has an anti-drop function. When
removing the battery holder from the belt, pull up the
battery holder while pressing the unlock button.
► 1. Unlock button
Installing or removing the fan unit
1. Open the zip fastener inside the jacket. (Skip this
step if your jacket/vest does not have the lining)
► 1. Zip fastener
1
1
1
2. Turn the ring counterclockwise and remove it from
the fan unit.
► 1. Fan unit 2. Ring
3.
From the outside of the jacket/vest, insert the
head of the fan unit into the hole in the jacket/vest.
2
► 1. Fan unit 2. Hole
4. From the inside of the jacket/vest, place the fan
unit so that the loop on the fan unit comes closest to the
strip on the jacket/vest.
(Do not fasten the snap button on the strip at this step.)
► 1. Strip 2. Loop
9 ENGLISH
2
1
1
2
1