FUTABA T4GRS-24G Manual page 20

Using the up timer
(Preparation)
Select the setting item "TYPE" using the (JOG) button.
Press the (+) or (-) button and select "UP".
1
(Alarm time setting)
Select the setting item "ALRM" using the (JOG)
button and set the alarm time with the (+) or (-)
button.
2
(Timer start/stop operation)
Start the timer by pressing the switch ("TIMER") set by func-
tion select switch function.
Stop the timer with the same switch ("TIMER") as start.
- Linking start only to the throttle stick
Select the setting item "RST" using the (JOG)
button and press the (+) and (-) buttons simul-
taneously for approximately 1 second. When
the set beeps and the status display switches
from "RST" to blinking "RDY", the system en-
ters the stick operation ready state. When the
stick is operated in the forward direction, the
timer starts. (Status display "RUN")
If the (JOG) button is pressed while the timer is operating,
the LCD returns to MENU2 screen.
3
(Timer reset operation)
Select a status display ("RUN", "STP", or
"RDY") direction the (JOG) button and press
the (+) and (-) buttons simultaneously for ap-
proximately 1 second. A beep is generated
and "RST" appears on the status display and
the timer resets.
Timer Function "TIMER"
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons si-
multaneously (approx. 1 sec) to
return to the HOME screen.
Alarm time (ALRM)
OFF, 1 ~ 99 m
Initial value: 5 m
Switches
Time start / stop
Status display
RST :Reset state
RDY :Throttle stick operation wait
RUN :Timer running
STP : Timer stopped
Status display
RST :Reset state
RDY :Throttle stick operation wait
RUN :Timer running
STP : Timer stopped
105