Yamaha DRIVE 2 EFI 2020 Owner's/Operator's Manual page 52

MAINTENANCE AND ADJUSTMENT
1
2
3
4
1. Adjusting screw
5
6
7
8
9
10
1. Bulb assembly
2. Rubber grommet
11 3. Bezel assembly
12
13
14
ADJUSTING A HEADLIGHT
NOTICE
It is recommended to have the headlight adjust-
ment performed by a Yamaha dealer.
TIP
The screw can be accessed from under the fender.
1. Using a Phillips head screwdriver, turn the ad-
justing screw.
2. Turning the screw clockwise will lower the beam
and turning the screw counter-clockwise will
raise the beam.
REPLACING A TAILLIGHT UNIT
1. If a taillight does not come on, replace the tail-
light unit removing the rubber grommet from the
bezel assembly.
2. Remove the wire connector, replace the taillight
unit, and reinstall by fitting the rubber grommet
over the taillight unit and bezel.
47