Table of Contents
Advertisement
PRE-OPERATION CHECKS
1
2
3
4
5
6
7
8
9
10
2
4
11
1
12
1. Fuel tank
2. Fuel cap
13
3. E.F.I. fuel pump
4. Fuel tank vent
5. Cover filler funnel
14
Pre-operation checks should be made each time you
use your PTV. Get in the habit of performing the fol-
lowing checks in the same way so that they become
second nature.
To keep vehicle from moving while performing
pre-operation checks:
• Remove main switch key.
• Apply parking brake.
Death or serious personal injury can result from
failing to comply with the safety instructions in this
manual.
PRE-OPERATION CHECKS
Refer to the Periodic Maintenance and adjustment
charts on pages 26 to 29.
SEAT
Open the seat for checking and servicing.
FUEL SYSTEM
3
Make sure there is sufficient fuel in the tank. Also
check fuel line and connections for leakage.
Gasoline and its vapors are highly flammable and
5
explosive. To avoid fires and explosions and to re-
duce the risk of injury when refueling, follow these
instructions.
WARNING
WARNING
19
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DRIVE 2 EFI 2020 and is the answer not in the manual?
Questions and answers
After sitting a while with out charging, the batteries on my electric 2020 cart will not charge. The charger has a gauge that shows the charge, but only a yellow and red light comes on.
If the batteries on your Yamaha DRIVE 2 EFI 2020 electric cart won’t charge after sitting for a while, possible reasons include:
1. Loose Battery Hold-Down Nuts – If the battery hold-down nuts are loose, the battery may have experienced excessive vibration or movement, causing connection issues.
2. Corroded Terminals – Corrosion on the battery terminals can interrupt the flow of electricity, preventing proper charging.
3. Missing Battery Cap – If the battery cap is missing, battery acid may have spilled, affecting battery performance.
4. Battery Damage from Extended Inactivity – Sitting for a long time without use may have discharged the battery too much, making it difficult for the charger to detect and initiate charging.
To resolve the issue, check and tighten the battery hold-down nuts, clean any corrosion from the terminals, ensure the battery cap is in place, and try jump-starting or trickle charging the battery if it is deeply discharged.
This answer is automatically generated
How thick are the brake pads