Yamaha DRIVE 2 EFI 2020 Owner's/Operator's Manual page 42

MAINTENANCE AND ADJUSTMENT
1
2
2
3
4
1. Drive select lever
2. Retaining pins
5
6
1
7
1. Plastic rivets
2. Tab
8
9
10
11
12
13
1. Intake tube
2. Floor trough
14
3. Intake air opening
AIR DUCT
Check for debris in intake air duct, tubing and con-
nections:
1. Park the PTV on a flat, level surface and apply
the parking brake.
2. Remove the floor mat.
3. Remove the seat.
4. Remove the drive select lever.
2
5. Unscrew and remove the 8 retaining pins and re-
move the front panel.
1
6. Remove the 2 plastic rivets.
2
7. Lift up on the floor panel and slide the panel tab
out of the slot. Remove the panel.
8. Clean out any dirt or debris from the intake tube,
the floor trough and the intake air opening.
9. After removing debris, install the floor panel,
front panel, drive select lever, seat and the floor
mat.
37