Yamaha DRIVE 2 EFI 2020 Owner's/Operator's Manual page 16

SAFETY INFORMATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SAFETY PRECAUTIONS DURING
MAINTENANCE
When performing maintenance, follow all safety in-
structions contained in the manufacturer's operation
and service manuals, as well as the following safety
procedures:
• Properly immobilize PTV before beginning any
maintenance to avoid any unexpected vehicle
movement.
• Properly block chassis before working underneath
PTV to avoid any unexpected vehicle movement.
• When working on the fuel system or the battery, do
not smoke, or allow any sparks or open flames near
the vehicle, to avoid any fires or explosions.
• Use only properly insulated tools when working
around batteries to avoid electrical shock or dam-
age to the electrical system.
• Maintain all safety devices including brakes, steer-
ing mechanisms, warning devices and governors,
in a safe operating condition. Do not modify these
safety devices as supplied by the manufacturer.
• After each maintenance or repair, the car must be
driven by a qualified, trained and authorized person
– in an area free of pedestrian traffic – to ensure
proper operation and adjustment.
• Record all maintenance performed in a mainte-
nance record log by date, name of person perform-
ing maintenance and type of maintenance. Period-
ically inspect maintenance log to ensure accurate
and complete entries.
• Provide operator comment cards to assist in iden-
tifying non-periodic maintenance needs for specific
PTVs.
• Maintain, in a legible condition all nameplates,
warnings, and instructions provided by the manu-
facturer.
• If new nameplates, warnings or instructions are
needed, contact your Yamaha Golf-Car Company
dealer.
11