Jensen CD-485 User Manual page 10

SKIP AND SEARCH MODE
1. During Play or Pause mode, tap the CD SKIP
BUTTON (#5) to go to the next track or go back to the beginning of the current track.
2. During play mode or Pause mode, press and hold the the CD SKIP
-
CD SKIP
playback.
PROGRAM PLAY MODE
This function allows music tracks to be played in a programmed sequence.
NOTE: Program can only be set in STOP mode.
1. Press the PROGGRAM BUTTON (#8) once. The program number 01 and the PROGRAM
INDICATOR (#17) both will flash.
2. Tap the CD SKIP
be programmed.
3. Press the PROGRAM BUTTON (#8) again to store the selection. The program number will
advance to 02 and flash to prompt for the next input.
4. You may repeat steps 2 to 3 to program up to 20 tracks. As soon as you have entered the
20th track, the LED DISPLAY (#14) will automatically show the programmed tracks one by
one in their correct sequence starting from the first. At the end of program review, program
number 01 and the PROGRAM INDICATOR (#17) will both flash.
5. Press the CD PLAY/PAUSE
PROGRAM INDICATOR (#17) will light up. Press the CD STOP
6. Normally all the programmed tracks will be played through once and then stop. However, you
may use the REPEAT function to repeatedly play a certain track (Repeat 1) or all tracks
(Repeat All) in the program. You may also tap the CD SKIP
to other tracks ahead or the CD SKIP
during program play.
7. To edit the programmed tracks during program playback, press the CD STOP
(#6) and then the PROGRAM BUTTON (#8). Program number 01 on the LED DISPLAY (#14)
and PROGRAM INDICATOR (#17) will both flash.
a. If you do not want to change any track in the program, press the CD STOP
(#6).
b. To edit a programmed track, tap the PROGRAM BUTTON (#8) repeatedly until you reach
the program number whose track you want to change. Tap the CD SKIP
(#4) or CD SKIP
BUTTON (#8) to confirm.
8. To cancel program play, press the CD STOP
is running or open the CD DOOR in stop mode. The PROGRAM INDICATOR (#17) will go off.
.
BUTTON (#5) to search within the current track with audible high speed
+
BUTTON (#4) or CD SKIP
BUTTON (#7) to complete and start program play. The
-
BUTTON (#5) to select a new track and press PROGRAM
+
BUTTON (#4) or CD SKIP
-
-
BUTTON (#5) to go back to previous track(s)
BUTTON (#6) twice while program playback
E-9
+
BUTTON (#4) or
BUTTON (#5) to select the track to
BUTTON (#6) to stop.
+
BUTTON (#4) to go directly
-
BUTTON
BUTTON
+
BUTTON