JVC DLA-VS4550 Instructions Manual page 51

Connect the motor cable
5
Connect the motor cable (20pin) to lens.
0
CAUTION
Keep the cable away from the motor gear when clamping the motor cable.
0
Tighten the 4 screws using the Phillips head screwdriver to fasten the lens
6
Use the screws that comes with the lens.
0
* The recommended tightening torque for the screws for mounting the lens is 1.47N ・ m (15kgf ・ cm).
Clamp the motor cable
7
Attach the front cover, and fasten using the 4 screws using a Phillips screwdriver
8
Motor Cable
Clamp
Motor Cable
Front Cover
51