JVC DLA-VS4550 Instructions Manual page 50

Unscrew the screw using a Phillips screwdriver to remove the front plate
2
Secure the lens spacer to the shift plate using the supplied screws
3
Shift Plate
(optional)
Attach the spacer and insert lens
4
Attach the Lens Spacer and Shift Plate to the Lens Holder and fasten using the 4 screws packed with Lens
0
Spacer using a Phillips screwdriver.
Insert the lens with the connector rightward.
0
Lens Holder
50
Front Plate
Lens Spacer
(This part is bundled in
the Accessory BOX)
Shift Plate + Lens Spacer
Sponge
(Wrap the supplied sponge around
the front end of the lens.)
Screw×4
(optional)
Screw×4
(Please use the screws
packed with Lens Spacer)
Lens